China Fonte de alimentação de comutação de saída única de 150W Fabricantes

novos produtos

Fonte de alimentação de comutação de saída única de 150W

Página inicial > Lista de Produto > Trocando a fonte energética > Fonte de alimentação de comutação de saída única de 150W

Fonte de alimentação de comutação de saída única de 150W

Pacote:	Depende da sua demanda
marca:	SCKJ
Lugar de origem:	Zhejiang, China (continente)

Informação básica

Modelo: S-150

Descrição do produto

Especificações 1. Alta eficiência, alta confiabilidade
2. Entrada AC universal / alcance total
3. Teste de queima de 100% em carga total

4. Protection: Short circuit/ Over load / Over voltage
5. Cooling by free air convection
6. Fixed switching frequency at 25KHz
7. 2 years warranty
8. Dimensions: 199*110*50mm(L*W*H)

Specification:

Model		S-150-5	S-150-9	S-150-12	S-150-13.5	S-150-15	S-150-24	S-150-27	S-150-48
Output	DC voltage	5V	9V	12V	13.5V	15V	24V	27V	48V
	Voltage tolerance	±2%	±1%	±1%	±1%	±1%	±1%	±1%	±1%
	Rated current	30A	16.7A	12.5A	11.2A	10A	6.5A	5.6A	3.2A
	Voltage range	0-30A	0-16.7A	0-12.5A	0-11.2A	0-10A	0-6.5A	0-5.6A	0-3.2A
	Rated power	150W	150.3W	150W	151.2W	150W	156W	151.2W	153.6W
	Ripple & noise	150mVp-p	180mVp-p	180mVp-p	180mVp-p	180mVp-p	240mVp-p	240mVp-p	240mVp-p
	DC adjustment range	±10%	-12%,+15%	-12%,+10%	-12%,+11%	±10%	-12%,+16%	-12%,+11%	±10%
	Setup, rise, hold time	100ms,50ms,20ms at full load
Input	Voltage range	88~132 VAC/176~264VAC 47~63Hz,selected by switch 248~370VDC
	AC current	3.2A/115 V 1.6A/ 230 V
	Efficiency	78%	80%	82%	83%	84%	85%	86%	87%
	Inrush current	Cold start 35A/230VAC
	Leakage current	<3.5mA/240VAC
Protection	Over load	110%~160%
	Over load	Protection type: Shut down o/p voltage, re-power on to recover
	Over voltage	115%~135%
	Over voltage	Protection type: Shut down o/p voltage, re-power on to recover
Environment	Working temp. & humidity	-10°C~+60°C;20%~90 %RH
	Storage temp. & humidity	-20°C~+85°C;10%~95 %RH
	Vibration	10~500Hz,2G 10min./1cycle,period for 60min, each along X, Y, Z axes
Safety	Withstand voltage	I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Safety	Isolation resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
Standard	Safety standard	Design refer to UL1012, UL1950,TUV EN60950
Standard	EMC standard	Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024
Others	Weight	0.8Kg
Others	Packing	16pcs/13.8Kg/0.95CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.