Fonte de alimentação de comutação de saída única de 60W

4. Protections: Short circuit / Over load / Over voltage
5. Cooling by free air convection
6. Fixed switching frequency at 50KHz
7. 2 years warranty
8. Dimensions: 159*97*38mm(L*W*H)

Specification:

Model

S-60-5

S-60-12

S-60-15

S-60-24

S-60-48

Output

DC voltage

5V

12V

15V

24V

48V

Voltage tolerance

±2%

±1%

±1%

±1%

±1%

Rated current

12A

5A

4A

2.5A

1.3A

Current range

0-12A

0-5A

0-4A

0-2.5A

0-1.3A

Rated power

60W

60W

60W

60W

62.4W

Ripple & noise

120mVp-p

120mVp-p

150mVp-p

150mVp-p

200mVp-p

DC adjustment range

+10, -5%

±10%

±10%

±10%

±10%

Setup, rise, hole time

800ms,50ms,10ms/115VAC   300ms,50ms,80ms/230VAC

Input

Voltage range

85~264 VAC     47~63 Hz;120~370VDC

AC current

2A/115 V    1A/ 230 V

Efficiency

73%

76%

77%

79%

80%

Inrush current

Cold start 30A/115VAC    60A/230VAC

Leakage current

Protection

Over load

135%~165%

Protection type: Fold back current limiting, recovers automatically after fault condition is removed.

Over voltage

115%~135%

Protection type: hiccup mode, recovers automatically after fault condition is removed.

Environment

Working temp. & humidity

-10°C~+60°C;20%~90 %RH

Storage temp. & humidity

-20°C~+85°C;10%~95 %RH

Vibration

10~500Hz,2G 10min./1cycle,period for 60min, each long X, Y, Z, axes

Safety

Withstand voltage

I/P-O/P: 3KVAC    I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC

Isolation resistance

I/P-O/P, I/P-FG, O/P-FG:   100M Ohms/500VDC

Standard

Safety standard

Design refer to UL1012, UL1950,TUV EN60950

EMC standard

Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024

Others

Weight

0.51Kg

Packing

24pcs/13.1Kg/0.7CUFT

1.  All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.  Tolerance: includes set up tolerance, line regulation and load regulation.
4.  The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.